English
Assembly Tips for Round Raised Garden Bed
Easy Setup
Connected the panels with a set of screws & wingnuts, easily tigten them with a screwdriver and a pair of gloves we provided.
STEP 1
Overlap the A curved panels assemblies & align the empty connector holes.
STEP 2
Secure and tighten the panels with B wingnuts and C screws.
SETP 3
Repeat steps 1 & 2 to assemble another round garden bed, then complete the assembly.
Assembly Tips for Oval Raised Garden Bed
Easy Setup
Connected the panels with a set of screws & wingnuts, easily tigten them with a screwdriver and a pair of gloves we provided.
STEP 1
Connect three A curved corner panels with eight C wingnuts and eight D screws. Repeat to assemble another three A curved corner panels.
STEP 2
Connect two B straight side panels with eight C wingnuts and eight D screws. Repeat to assemble another two B straight side panels.
STEP 3
Interlock all the three A curved corner panels and two B straight side panels, tighten all the screws.
Assembly Tips for Rectangular Raised Garden Bed
Easy Setup
Connected the panels with a set of screws & wingnuts, easily tigten them with a screwdriver and a pair of gloves we provided.
STEP 1
Attach two A-1 side panels and one A-2 end panel to two C corner brackets (place the holes facing down), secure them with twelve E screws and twelve G wingnuts for each brackets. Repeat to assemble the other end.
STEP 2
Overlap the two halves of the garden bed, align the empty connector holes.
STEP 3
Align the empty connector holes with two D- L Bracing Rod, secure with four F Screws and four G wingnuts for each side, leave the top and bottom connector holes empty.
STEP 4
Attach the two B bracing rods with four F screws and four G wingnuts in the top and bottom connector holes.
STEP 5
Secure the brackets with six H ground stakes, one stake per hole.
ATTENTION
Make sure to keep the wingnuts inside and the screws outside and tighten them for reinforcement. Failure to tighten to its maximum may cause failure.